Hyundai Kona FWD

Toyota Corolla Cross

GMC Yukon XL 4WD

GMC Yukon 2WD

Buick Encore GX AWD

Audi V8

The contact owns a 2026 Ford Bronco. The contact stated that while driving at approximately 10 MPH and depressing the accelerator to make a left turn, the vehicle failed to accelerate as intended. The transmission shifted into neutral, and the vehicle coasted forward. The contact pulled over to the side of the road and activated the hazard lights. The system was reset, and the vehicle was able to accelerate. There were no warning lights illuminated. The vehicle was taken to the dealer, who was unable to duplicate or determine the cause of the failure. The vehicle was not repaired. The manufacturer was not made aware of the failure; however, the dealer contacted the manufacturer and confirmed the dealer's decision of the dealer. The failure mileage was approximately 617.

FORD BRONCO 2026 POWER TRAIN

Description  On your vehicle, it may be possible that one or more engine camshaft roller finger followers were not properly installed at the time of engine assembly.  Safety Risk  An improperly installed engine camshaft roller finger follower may result in engine failure, resulting in a no-start condition or a loss of motive power. A loss of motive power increases the risk of a crash. Your vehicle may also experience engine ticking or tapping noise, and or a low-volume oil leak due to this condition.  Remedy  A remedy is not yet available. Ford Motor Company is working to provide parts for this repair. When the remedy becomes available, Ford Motor Company will notify you via mail to schedule a service appointment with your dealer for repairs to be completed free of charge. The remedy is anticipated to be available 4TH quarter of 2026.  Next Steps  Contact your dealer for more information to schedule the free service.  NOTE: Recall service not available right now. We have a remedy but parts are not available right now. We will inform you when the service is available. Or, you can contact your dealer.

FORD BRONCO 2026 ELECTRICAL SYSTEM

Summary of the Safety Problem: A 2026 Ford Bronco rolled out of its parked position with no occupants, despite being left in Park, and collided with another vehicle.  Full Description of the Incident: The Ford Bronco was placed in Park, was not running, and had no occupants. I exited the vehicle several times to reinstall the removable roof panels. The vehicle remained stationary during this process. After completing the roof panel installation, my wife and I closed the doors and trunk and we walked toward the building. A witness (the owner of the other car that was involved in car collision ) confirmed that the Bronco was still parked where we left it. A short time later, we learned that the Bronco had rolled out of its parking spot and struck a parked car. The Bronco had not been touched, driven, or moved by anyone after we walked away that we were aware of. There were no warning signs that we were aware of.  The police were at the scene and filed a report.  This was a Enterprise Car Rental Vehicle with approx. 1,300 miles. I am unsure if this vehicle has been inspected by Enterprise.  Damage / Injuries: â¢Collision with a parked car. â¢No injuries reported. â¢Police report filed (attached). â¢Photos available (attached).  Why This Is a Safety Defect: A vehicle that rolls away while in Park violates the intent of Federal Motor Vehicle Safety Standard (FMVSS) 114, which aims to prevent accidental rollaway. This Bronco should not have moved under any circumstances once placed in Park.  What You Request NHTSA to Investigate: â¢Whether the 2026 Ford Bronco has a defect in its Park mechanism, parking brake system, or electronic controls that can cause unintended rollaway. â¢Whether similar complaints exist for this model year. â¢Whether a recall or inspection campaign is warranted to prevent future incidents.  Attachments Included: â¢Police Accident Report â¢Photos of vehicle positions and damage â¢Rental agreement

FORD BRONCO 2026 UNKNOWN OR OTHER

The 2026 Ford Bronco Outer Banks instrument cluster has gone blank on two occasions (4/3/26 and 4/23/29). The first time the service department at Joe Mahan Ford, Paris, TN reported the display returned when connected to thier computer, but kept the Bronco for several days trying to replicate the condition. I returned it to the dealer for the same fault on 4/27/26 and it is still in the shop. With the Cluster blank the gauges, speedometer, cruise control, lane warning and assist are not operational. Speed limit and travel speeds are visible on the Car Play navigation screen. Iâll update this complaint upon dealer release.

2026 Ford Bronco 4WD — vehicle data sourced from FuelEconomy.gov.

O Ford Bronco 4WD (2026) é um SUV compacto 4x4 com tração integral, ideal para quem busca aventura. Certificado em segurança, este modelo oferece uma transmissão automática de 8 velocidades e um motor turbo de 2.3L.

	1984	1985	1986	1987	1988	1989	2026
product.price	—	—	—	—	—	—	—
specs.engine_capacity	5.8L	5L	5.8L	5.8L	5.8L	5.8L	2.3L
specs.fuel_type	Comum	Comum	Comum	Comum	Comum	Comum	Regular
specs.transmission	Automático 3 velocidades	Automático 4 velocidades	Automático 3 velocidades	Automático 3 velocidades	Automático 3 velocidades	Automático 3 velocidades	8 speed automatic
specs.body_type	Veículo de propósito especial 4WD	Veículos de propósito especial	Veículos de propósito especial	Veículos de propósito especial	Veículos de propósito especial	Veículos de propósito especial	SUV

Ford Bronco 4WD (2026) product.specifications